What tools do I need to build my drift boat?
Our drift boat kits can be built with hand tools that are found in most homes. You probably already have most of what you need. A load of four inch C-clamps and some inexpensive epoxy rollers might be the only specialty tools that you don't have lying around. The epoxy lay-up rollers and laminating roller need to be specifically for epoxy.
- Hand drill
- Belt Sander
- Sabre Saw
- Palm Sander
- Router
- Hammer
- Shop Vacuum
- Measuring Tape
- Caulking Gun
- 8 four inch C clamps
- Straight Edge
- 1/4 inch drill bit
- 1 inch drill bit
- Countersinks for screws
- Phillips driver heads
- Paint scraper
- Epoxy spreaders
- Epoxy lay-up roller
- Epoxy laminating roller
- #80 Sand paper
- #220 Sand paper
